A&D ML-50 Moisture Analyzer — Thermogravimetric Laboratory Moisture Meter from Venta Lab
The A&D ML-50 moisture analyzer is a laboratory instrument designed for the rapid determination of moisture content using the thermogravimetric method. It is intended for the analysis of solid, granular, and paste-like materials, as well as suspensions and liquid samples suitable for analysis via heating and mass loss measurement.
The A&D ML-50 laboratory moisture meter is used in the food, pharmaceutical, chemical, and construction industries, as well as in agriculture, to monitor the moisture content of raw materials, substances, and finished products.
Thermogravimetric Determination of Material Moisture
The operating principle of the ML-50 moisture analyzer is based on measuring the change in a sample's mass during heating. The instrument detects mass loss and calculates the percentage of moisture content based on pre-set drying parameters.
This method is applied to the analysis of powders, granules, food ingredients, bulk raw materials, pastes, and industrial mixtures. For materials containing volatile components, results should be interpreted with consideration for the specific composition of the sample.
Halogen Heating and SHS Technology
The A&D ML-50 is equipped with a halogen heating system featuring a replaceable lamp. Its Secondary Radiation Assist (SRA) technology facilitates efficient heat transfer to the sample, thereby reducing the time required for analysis.
The SHS (Super Hybrid Sensor) ensures stable mass determination during analysis. The integration of a weighing system and a heating unit allows for the monitoring of mass changes without the need to transfer the sample between separate instruments.
Operating Modes of the ML-50 Moisture Analyzer
Five drying modes are available to select the optimal measurement conditions:
Standard — for typical laboratory analyses;
Rapid — for accelerated heating;
Automatic End — stops based on a pre-set criterion;
Timer — drying for a specified duration;
Manual — the operator controls when the analysis ends.
Results can be displayed based on moisture content or dry basis, as a proportion of the dry residue, or as a ratio.
Features and Benefits of the A&D ML-50 (Venta Lab, Dnipro)
Thermogravimetric method for moisture determination.
Halogen lamp with an easy-replacement design.
SHS and SRA technologies.
Five drying programs.
Large vacuum fluorescent display (VFD).
Storage for measurement parameters.
RS-232C interface for data transfer.
Supports documentation in compliance with GLP/GMP/ISO standards.
Ergonomic design tailored for laboratory use.
Applications of moisture analyzer in Industrial Laboratories
The A&D ML-50 moisture analyzer is suitable for quality control of bulk products, food ingredients, chemical raw materials, powders, and construction mixtures. The device is used for the incoming inspection of raw materials, verification of production batches, preparation of laboratory reports, and analysis of moisture content changes following the drying process.
A&D ML-50 Package Contents
The package includes the analyzer, an 85 mm diameter aluminum pan, 100 disposable pans, a pan holder, protective covers for the device and display, a power cord, and operating documentation.
Purchase the A&D ML-50 Moisture Analyzer in Dnipro
Venta Lab (based in Dnipro) supplies A&D laboratory moisture analyzers and quality control equipment throughout Ukraine.
Venta Lab specialists provide consultations on equipment selection, configuration of measurement modes, staff training, and ongoing service support.
The A&D ML-50 is a laboratory analyzer designed for the rapid determination of material moisture content using the thermogravimetric method.
Venta Lab, Dnipro
Phone: +38(096)000-04-46, +38(093)000-04-46, +38(095)000-04-46
