Khmelnytskyi company "Valon-A" offers ShO-06 switchboard panels. We accept orders by phone +38(097)968-43-35
ShO-06 switchboard panels are designed for receiving and distributing three-phase alternating current electrical energy with a frequency of 50 Hz and a voltage of up to 660V and protecting outgoing lines from overloads and short-circuit currents.
Climatic type U3 according to GOST 15150.
Normal operation of the switchboard is ensured under the following conditions:
1. Altitude above sea level - no more than 1000 m;
2. The environment is explosive, not containing conductive dust, aggressive gases and vapors in concentrations that reduce the parameters of the switchboard within unacceptable limits;
3. Wind speed up to 36 m/s (wind pressure speed up to 800 Pa);
4. Atmosphere type - II according to GOST15150.
SHO panels are manufactured in two versions by degree of protection (the first digit in the panel designation):
1 - open (degree of protection IP00 and only from the facade side - IP20);
2 - closed (degree of protection IP20 and only from the bottom side - IP00).
By purpose, the panels are divided into entrance, sectional, distribution and auxiliary. Auxiliary panels include dispatching control panels, metering cabinets and end panels.
With a two-row installation of panels, the switchgear is equipped with a bus bridge with a distance between the facades of -1000, 1500 and 2000 mm.
The panels are equipped with the following equipment:
1. Introductory and sectional - with automatic circuit breakers of withdrawable and fixed design and circuit breakers;
2. Distribution - with automatic circuit breakers of withdrawable or fixed design, circuit breakers with RPS fuses or insulated circuit breakers with RBK or ARS fuses.
Upon request, the products are equipped with reactive power compensation units.
The panels are assembled into transport groups up to 4 m long.
Example of ordering an introductory panel of the type SHO of protection degree IP00 with a rated input current of 1,600 A, made according to scheme 01
